Journal Articles
Permanent URI for this collectionhttps://hdl.handle.net/20.500.12504/518
Browse
Browsing Journal Articles by Issue Date
Now showing 1 - 3 of 3
- Results Per Page
- Sort Options
Item Bifunctional catechol-based coating strategy to construct highly effective antimicrobial polyethylene microfibers for personal protective equipment(ScienceDirect: Progress in Organic Coatings, 2025-01) Mbonimpa Innocent; Gongxun Zhai; Mugaanire Tendo Innocent; Jialiang Zhou; Xin Dai; Tianqi Jiang; Jinqi Wang; Hengxue Xiang; Meifang ZhuPolyethylene (PE) microfiber materials are of great interest in the production of personal protective equipment (PPE) due to their cost-effectiveness and excellent mechanical and barrier properties. However, they lack inherent antibacterial properties and are therefore susceptible to attack and contamination by microorganisms, leading to the spread of associated infections. Incorporating antibacterial agents onto the material's surface is an effective approach to achieve antimicrobial functionality. Nevertheless, this is limited by the chemical inertness of PE, thus requiring surface modification treatments. Here, we successfully synthesized bifunctional catechol-based antibacterial polymeric coatings and applied them to develop durable antibacterial PE fabrics through dip-coating. Cationic copolymers comprising dopamine methacrylamide (DMA) and hexylated vinyl pyridine (QVP) moieties were prepared through free radical polymerization (FRP) followed by N-alkylation with hexyl bromide. The copolymers were extensively studied to investigate the effect of composition on the yield and antibacterial properties. The copolymers exhibited good antibacterial properties in an aqueous solution, and the antibacterial activity and yield were higher in copolymers with higher QVP units. In addition, the prepared antibacterial PE fabrics exhibited good antibacterial activity against gram-positive Bacillus subtilis (B. subtilis) and gram-negative Escherichia coli (E. coli), which remained unaffected by several laundering cycles, thus hold potential for use in antibacterial protective textiles.Item Performance comparison of decoction and ultrasound assisted extraction of Allium burdickii extracts for tie-dyeing cotton fabrics(Discover chemistry, 2025-12-01) Agulei, Karen D.; Githaiga, T. John ; Dulo, Benson ; Nganyi, O. Eric ; Khafafa, JohnThe selection of precise variables during the extraction and colouration with natural dyes either enhances or vitiates their yield. This research study focused on the extraction of total phenolic content from Allium burdickii bulbs and their application to cotton fabric. The extraction performed using two methods, namely decoction and ultrasound-assisted extraction, was varied under three different parameters (temperature, time, and solvent type). The extracts were qualitatively and quantitatively analysed using Raman, UV-Vis spectroscopy, and Gas ChromatographyMass Spectrometry (GC-MS). Subsequently, the extracts were applied on cotton fabric using four dyeing conditions (temperature, time, salt, and mordant concentration) and three mordanting methods (pre, meta, post), using the tie and dye method. The results confirmed the presence of compounds such as phenols, tannins, flavonoids, and saponins in the Allium burdickii bulb. The GC-MS profile revealed the presence of eight compounds in the extract. The highest TPC of 984.1 ± 5.6 mg GAE/g DW was attained using 50% glycerol, at 40 ˚C and for 60 min, using ultrasound-assisted extraction. Furthermore, Raman spectroscopic analysis confirmed the presence of functional groups, including nitroso, phenols, azo, triazenes, aromatic ethers, and alkenes. For fabric colouration, the highest exhaustion and fixation were 81.0% and 59.1%, respectively, obtained at 69.8 ˚C, 20 min, 5% mordant concentration, and 2% salt concentration conditions. This study has therefore demonstrated that the Allium burdickii bulb is a sustainable source of dye compounds suitable for use in textile colouration, and hence, can potentially substitute for the often toxic synthetic analogues.Item Tunable hydrophobic‑antimicrobial terpolymers enable long‑lasting, wash‑resistant protection of polyethylene fabrics(Progress in Organic Coatings, 2025-12-17) Mbonimpa, Innocent; Gongxun Zhai; Mugaanire Tendo Innocent; Senlong Yu; Tianqi Jiang; Jinqi Wang; Hengxue Xiang; Meifang ZhuThe increasing prevalence of antibiotic-resistant bacteria and healthcare-associated infections has escalated the demand for advanced antibacterial materials. Polyethylene (PE) fabrics, renowned for their exceptional mechanical and barrier properties, have garnered significant attention in personal protective equipment (PPE). However, their susceptibility to bacterial contamination presents a considerable challenge. While dopamine-based copolymer coatings have been explored for imparting antibacterial properties, they often induce an undesirable increase in hydrophilicity, thereby compromising the hydrophobicity and barrier performance of PE fabrics. To address this limitation, we developed terpolymers synthesized via free radical polymerization, comprising dopamine methacrylamide (DMA), butyl methacrylate (BMA), and vinyl pyridine (VP), followed by quaternization with hexyl bromide. By systematically varying the BMA/VP ratios while maintaining a constant DMA content, five distinct terpolymer compositions were synthesized. The incorporation of hydrophobic BMA and hexyl groups effectively counteracted the inherent hydrophilicity of DMA, resulting in PE fabrics with water contact angles exceeding 85°. The antibacterial efficacy of the coated fabrics against Escherichia coli and Bacillus subtilis remained consistently above 99.9 % after 50 laundry cycles, demonstrating the coating's exceptional durability. Additionally, the fabrics exhibited a tensile strength of 32.4 MPa, excellent biocompatibility, and reduced air permeability, positioning them as promising candidates for long-term use in protective clothing.